Ultra-sensitive YBCO nanoSQUIDs for the investigation of magnetic nanoparticles

DSpace Repository

Show simple item record

dc.contributor.advisor Kölle, Dieter (Prof. Dr.)
dc.contributor.author Lin, Jianxin
dc.date.accessioned 2020-09-03T09:52:27Z
dc.date.available 2020-09-03T09:52:27Z
dc.date.issued 2020-09-03
dc.identifier.other 1729081460 de_DE
dc.identifier.uri http://hdl.handle.net/10900/106120
dc.identifier.uri http://nbn-resolving.de/urn:nbn:de:bsz:21-dspace-1061205 de_DE
dc.identifier.uri http://dx.doi.org/10.15496/publikation-47498
dc.description.abstract Superconducting quantum interference devices (SQUIDs) are used in an impressively large variety of applications requiring sensitive detection of magnetic flux. In recent years, there has been a growing scientific and technological interest in the development of nanoSQUIDs, i.e. strongly miniaturized SQUIDs with lateral size on the sub-micrometer scale, that can be used to detect the magnetization of small spin systems like individual magnetic nanoparticles. The development of nanoSQUIDs is a major research topic at the Physics Institute - Experimental Physics II. In this thesis, we first review the major achievements obtained so far on the development of sensitive nanoSQUIDs in Tübingen, based on Nb and YBa2Cu3O7 (YBCO) as superconductors. This part emphasizes the advantages offered by YBCO nanoSQUIDs, fabricated on bicrystal SrTiO3 (STO) substrates, regarding enhanced ranges of temperature and magnetic field, over which those nanoSQUIDs can be operated. Regarding the application of YBCO nanoSQUIDs fabricated on STO bicrystal substrates, we have studied the occurrence of magnetic-field-driven nucleation and annihilation of magnetic vortices in individual ultrasmall ferromagnetic Co particles by YBCO nanoSQUID magnetometry. We demonstrate that the Co particles reveal bi-stable magnetization states at zero applied field, with the vortex state being the ground state. This topic is important in order to understand the thermal and temporal stability of noncollinear and other nontrivial spin textures, e.g., vortices or skyrmions, confined in ultrasmall ferromagnets. Improving the sensitivity and long-time stability of YBCO nanoSQUIDs are in the focus of the research activities presented within this thesis. A process for the fabrication of YBCO nanoSQUIDs on MgO bicrystal substrates has been developed. The lower dielectric permittivity of MgO, as compared to STO, offers the possibility to realize YBCO nanoSQUIDs without the need of a resistively shunting Au layer on top of the YBCO film. This in turn offers a significant increase of the characteristic voltage of the grain boundary Josephson junctions intersecting the SQUID loop, which should significantly improve the sensitivity of the nanoSQUIDs. We demonstrate that YBCO nanoSQUIDs patterned by focused Ga ion beam (Ga FIB) milling on MgO bicrystals can have non-hysteretic current voltage characteristics (IVCs) at 4.2K even without Au as shunting layer, which shows the high potential to further improve the flux sensitivity. We further clarify the evolution of the electric transport and noise properties at 4.2K of YBCO nanoSQUIDs on bicrystal MgO substrates, upon decreasing the thickness of the Au film used as a resistively shunting layer. Moreover, we compare the performance of YBCO nanoSQUIDs fabricated on STO and MgO bicrystals at 77K and 4.2 K. A new approach based on heteroepitaxially grown superlattices was implemented in order to improve the flux sensitivity of nanoSQUIDs. We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBCO/STO superlattices on STO bicrystal substrates. Nanopatterning is performed by Ga FIB milling. The electric transport properties and thermal white flux noise of superlattice nanoSQUIDs are comparable to single layer YBCO devices on STO bicrystals. However, we find that the superlattice nanoSQUIDs have more than an order of magnitude smaller low-frequency excess flux nois. We attribute this improvement to an improved microstructure at the grain boundaries forming the Josephson junctions in our YBCO nanoSQUDs. Last but not least, we developed a novel weak link in YBCO thin films based on an artificial bottom-up technology, i.e., by using Ga FIB milling to prepare nanogrooves in single crystal STO substrates, prior to YBCO thin film growth. This technique combined with cutting edge equipment like extreme ultraviolet lithography could provide a cost-effective and reliable pathway for scaling up superconducting circuits operating at liquid-nitrogen temperature. en
dc.language.iso en de_DE
dc.publisher Universität Tübingen de_DE
dc.rights ubt-podok de_DE
dc.rights.uri http://tobias-lib.uni-tuebingen.de/doku/lic_mit_pod.php?la=de de_DE
dc.rights.uri http://tobias-lib.uni-tuebingen.de/doku/lic_mit_pod.php?la=en en
dc.subject.classification Quanteninterferometer de_DE
dc.subject.ddc 530 de_DE
dc.title Ultra-sensitive YBCO nanoSQUIDs for the investigation of magnetic nanoparticles de_DE
dc.type Dissertation de_DE
dcterms.dateAccepted 2020-08-25
utue.publikation.fachbereich Physik de_DE
utue.publikation.fakultaet 7 Mathematisch-Naturwissenschaftliche Fakultät de_DE

Dateien:

This item appears in the following Collection(s)

Show simple item record